How to Install NTK Printers on Your Laptop/Tablet

You may need to install NTK printers on your own laptop or tablet. The process differs depending on which operating system you use. Follow the instructions below.

You need to be a registered library patron and you need to connect your device to NTK-Simple WiFi.

If you require assistance, please ask at a service desk.

  1. Download and launch installation script (64 bit) (32 bit)
  2. On prompt please fill in your NTK credentials.
  3. Using these instructions you'll also mount your NTK home folder (used for public PCs and scanned documents) as a network drive.
  4. Now you have installed NTK print queue and your're ready to print.
  1. Download and install the driver

  2. Go to System Preferences > Print & Scan > Settings and press the (+) button on the bottom left.

  3. Select Advanced settings.
    Note: You may need to add the Advanced settings icon to the toolbar by right clicking the toolbar at the top and selecting Customize Toolbar. Then drag & drop the Advanced button to the toolbar.

  4. Fill in the following information for the new printer.

    • Type: Windows printer via spoolss
    • Device: Other device
    • URL: smb://samba.ntkcz.cz/ntk
    • Print using: KONICA MINOLTA C300i PS
  5. For Print Using, select KONICA MINOLTA C300i PS and click Add.

  6. Click Continue (default settings do not need to be changed).

  7. When the printer installation is finished, a window of printer details will appear. To print, select this printer and enter your NTK username and password.

Printer queue is at \\samba.ntkcz.cz\ntk , driver for Bizhub c300i is on vendor's webpage. Credentials are the same you're using for other services in NTK.

 
  1. In terminal use sudo dnf install system-config-printer.x86_64 to install CUPS printer configuration tool and status applet
  2. Install Python 3 bindings for the Samba client library python3-smbc sudo dnf install python3-smbc
  3. Run Print Settings

    Spusťte Print Settings
  4. Click Add > Network Printer > Windows Printer via SAMBA.

    Add printer
  5. In the field SMB Printer add samba.ntkcz.cz/ntk. Choose Authentication > Set authentication details now and fill in Password and Username. Credentials are the same you're using for other services in NTK. Press Forward.

    Setting Print Queue
  6. From Manufacturers list choose KONICA MINOLTA > Forward.

    Choose KONICA MINOLTA
  7. In models choose C352/C300, Drivers KONICA MINOLTA C352/C300 PS(P)[en](recommended) > Forward > Forward > OK

    Choose C352/C300 a KONICA MINOLTA C352/C300 PS(P)[en](recommended)
  8. The printer is now set up.

    The printer is now set up

Contact

info@techlib.cz

 (+420) 232 002 535

See also

Editor: Stephanie Krueger Last modified: 3.12. 2019 08:12